Network Technologies PS/2 Manuel d'utilisateur

MAN077 Rev Date 7/2/2007 KEEMUX-Px PS/2 KVM Switch Installation and Operation Manual

NTI KEEMUX Series PS/2 KVM Switch 6 Configuration All 4, 8, and 16-port units are configured using the 8-position dip-switch (located on the front

NTI KEEMUX Series PS/2 KVM Switch 7 2. Connect Local CPUs to any remaining consecutive ports on the master as described under INSTALLATION on pag

NTI KEEMUX Series PS/2 KVM Switch 8 Keyboard Control Keyboard control of the KEEMUX can be achieved using either of two methods: • Basic Comman

NTI KEEMUX Series PS/2 KVM Switch 9 Figure 8- Connections grouped by po

NTI KEEMUX Series PS/2 KVM Switch 10 OSD CONTROL (Optional) OSD superimposes a menu system on the user’s video screen with a list of all connected

NTI KEEMUX Series PS/2 KVM Switch 11 User Login Mode (Cont'd) Function: Keystroke: Submit user name/password Exit User Login Mode

NTI KEEMUX Series PS/2 KVM Switch 12 Function: Keystroke: Add character to password string or verify password string Delete previous cha

NTI KEEMUX Series PS/2 KVM Switch 13 User Access Functions Introduction The OSD menu enables a user to name the CPUs connected to the KEEMUX and

NTI KEEMUX Series PS/2 KVM Switch 14 OSD Command Mode (Cont'd) Function: Keystroke: Selects the last port on the switch Switch to

NTI KEEMUX Series PS/2 KVM Switch 15 Edit Mode Edit Mode allows the user to modify the names of the CPUs connected to the switch. Names of CPUs c

i TRADEMARK KEEMUX is a registered trademark of Network Technologies Inc in the U.S. and other countries. COPYRIGHT Copyright © 1999-2

NTI KEEMUX Series PS/2 KVM Switch 16 Search Mode Search Mode allows the user to enter and maneuver through a list of CPU names. As the user types,

NTI KEEMUX Series PS/2 KVM Switch 17 Maintenance Mode (Cont’d) Function: Keystroke: Make OSD window taller Make OSD windo

NTI KEEMUX Series PS/2 KVM Switch 18 RS232 CONTROL (Optional) RS232 Connections and Configuration Remote Connection The RS232 Interface (optiona

NTI KEEMUX Series PS/2 KVM Switch 19 Unit Address and Loop Back To allow multiple units to be controlled from a single CPU port, the RS232 control

NTI KEEMUX Series PS/2 KVM Switch 20 Command Protocol CPU controller commands supported by the unit are defined below. All commands should be ter

NTI KEEMUX Series PS/2 KVM Switch 21 NTI Switch Control Program For Windows 9X, NT, 2000 And XP The Matrix Switcher's Control Program is an e

NTI KEEMUX Series PS/2 KVM Switch 22 8) Change Volume for Audio Output/User (only applicable to models with audio support) - change Audio port o

NTI KEEMUX Series PS/2 KVM Switch 23 HOW TO DISABLE OPERATING MODES The operating modes of the KEEMUX can be disabled if a user desires to

NTI KEEMUX Series PS/2 KVM Switch 24 NOTE: Before proceeding, it is important to discharge any static charge you may be carrying by touching any

NTI KEEMUX Series PS/2 KVM Switch 25 AUDIO SUPPORT (Optional) Audio support provides the following additional features: • Audio signals from

ii TABLE OF CONTENTS INTRODUCTION...

NTI KEEMUX Series PS/2 KVM Switch 26 SPECIFICATIONS FOR STRAIGHT-THROUGH RS232 SERIAL CABLE KEEMUX to PS2 CPU (9 PIN) KEEMUX PS/2

iii TABLE OF FIGURES Figure 1- Keyboard dip-switch configuration...

NTI KEEMUX Series PS/2 KVM Switch 1 INTRODUCTION The KEEMUX PS/2 KVM switch (KEEMUX) enables access to several IBM PC-AT, PC-AT Clone or PS/2 CPUs

NTI KEEMUX Series PS/2 KVM Switch 2 FEATURES AND FUNCTIONS 1. Power ON/OFF switch 2. Mode LEDs- for visual indication of switc

NTI KEEMUX Series PS/2 KVM Switch 3 INSTALLATION Prepare To Connect 1. Before connecting the KEEMUX to the CPUs, make sure all CPUs, the monito

NTI KEEMUX Series PS/2 KVM Switch 4AT Style Connector 2. Connect the keyboard cable to the 6 pin miniDIN female port labeled “KEYBOARD” on the re

NTI KEEMUX Series PS/2 KVM Switch 5 Power Up 1. Turn the KEEMUX power ON first. The mode LEDs on the KEEMUX should flash twice. 2. Turn the mo