Network Technologies 900GV Manuel d'utilisateur télécharger pdf (Page 33)

Installing the Setup Port Cable 3-3

Connecting to the Setup Port

To connect to the setup port on the module, complete the following steps:

The following legend identifies the setup port cabling in Figure 3-1:

Step Action

1 Ensure that the transmit and receive baud rates on the setup port device

are set to 9600 baud, 8-bits, no parity.

2 Connect the setup port device to the setup port connector on the

DIGITAL MultiSwitch 900.

Item Description

1 Out-of-Band Management (OBM) Port

2 Setup Port

3 Setup Port Cable

4 Setup Port Device

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 71 72

Pas de commentaire

Network Technologies 900GV Manuel d'utilisateur Page 33