Network-technologies DVB-ASI to IP Manuel d'utilisateur télécharger pdf (Page 38)

ASI-IP-GTW User's Manual

Page 38

3.5.6 Security

Figure 11 shows the sub-page for user security (password protection).

Figure 15. Time setting sub-page

Enable Password Protection: Mark this to enable password protection.

If password is not set, it will use the factory default password.

Factory default:

Administrator login: admin

Password: salvador

Old Password: To be able to set a new password, the user must know

the old password.

New Password: Type the new password. Allowed length is 0 to 20

characters.

Retype New Password: Retype the new password as a security

measure.

Change Password: Click this button to activate the new password.

Note: If you forget the password that has been configured, you will

need to log on to the unit through the RS232 port. When you are logged

on, type “userdb factory_defaults”. This will reset the password to the

factory defaults detailed above.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 92 93

Pas de commentaire

Network-technologies DVB-ASI to IP Manuel d'utilisateur Page 38