Network Technologies RACKMUX-UW17-8USB Manuel d'utilisateur Page 24

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 29
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 23
NTI RACKMUX Console Drawer with UNIMUX Switch
20
CASCADING
The UNIMUX can be cascaded as shown in Fig. 21 below. Single user or multi-user UNIMUX switches may be connected
downstream (see Figs. 23 and 24). The first switch in a cascaded system is referred to as the "master", while all downstream
switches are referred to as "slaves". The only additional hardware required to cascade switches is a set of device and monitor
cables for each “SLAVE UNIT” (USB-VEXT-xx-MM). All CPUs and switches can then be controlled by users using OSD
commands with Command Mode.
Notes:
The UNIMUX used in a RACKMUX cannot be connected in a cascaded system with UNIMUX-USBV-x switches made
prior to 10-1-04.
Slaves in a cascaded system must be either all single-user switches or all multi-user switches, but not a
combination of both.
Cascaded Installation
a. Using the 15HD video cable ends of a USBVEXT-xx-MM cable, connect the USB KVM slave's MONITOR port to the master’s
VIDEO 1 port.
b. Using the USB ends of the same USBVEXT-xx-MM cable, connect one of the USB slave’s USB DEVICES ports to the
master’s CPU 1 port.
Note: Only one of the two ports labeled DEVICES on a slave needs to be used in order for cascading to work.
c. Repeat step b. & c. for each additional slave, keeping in mind that each slave will connect to the next available master’s
port (i.e. Slave #2 to master’s VIDEO 2 & CPU 2, etc.) See Fig. 24 on page 22.
Figure 21- Connections for Cascading
.
(slave unit 1) (slave unit 2)
(slave unit 3)
(master unit)
USB-VEXT-xxMM
USBVEXT-xx-MM
USB
CPU
UNIMUX-USBV-8
USB
CPU
USB
CPU
USB
CPU
USB
CPU
USB
CPU
USB
CPU
USB
CPU
USBVEXT-xx-MM
U
S
B
V
E
X
T
-
x
x
-
M
M
U
S
B
V
E
X
T
-
x
x
-
M
M
USB-VEXT-xxMMUSB-VEXT-xxMM
UNIMUX-USBV-8 UNIMUX-USBV-8
UNIMUX-USBV-8
Vue de la page 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29

Commentaires sur ces manuels

Pas de commentaire