Network Technologies RACKMUX Series Manuel d'utilisateur télécharger pdf (Page 9)

NTI RACKMUX RACKMOUNT ANSI TERMINAL DRAWER

1.1.2 Optional Telco 2-Post Mounting

If the Telco 2-post mounting bracket kit (RL-T15-TEL) is to be used, secure the short and long brackets to each side of the drawer

as shown in Fig. 3. Apply 2 nuts (supplied) per bracket to secure the brackets to the drawer. Apply two #10-32x3/4” screws

(supplied) per bracket to the post at the desired height. Slots are provided in the brackets to make minor depth adjustments

easy. Be sure to properly tighten all nuts and screws before using the drawer.

Figure 3- Mount to Telco post with optional mounting brackets

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 54 55

Pas de commentaire

Network Technologies RACKMUX Series Manuel d'utilisateur Page 9