Network-technologies CAT5 Manuel d'utilisateur télécharger pdf (Page 17)

Power Up for the first time

Note: The user devices, monitor, and CAT5 cable should already be connected before powering up the User Station.

1. Connect the AC adapter power connector to the 5VDC port on the User Station (see Figure 13). Plug the AC adapter into a

power outlet and press the power switch to turn the User Station ON. The yellow LED on the RJ45 connector of the User

Station should illuminate, indicating that a proper power connection has been made to it.

2. Re-connect the power cord to the CPU.

FYI: The Host Adapter is powered by the CPU.

3. Power up the monitor.

Figure 13- Connect the AC adapter to the User Station

4. With the User Station and Host Adapter connected via CAT5 cable, refer to "Using the PRIMUX " on page 13.

FYI: The green LED on each RJ45 connector will illuminate anytime data traffic is passing between the Host Adapter and

User Station, indicating proper CAT5 cable connection and communication. (See Figure 13)

Barrel

(Inside

barrel)

(Outside

barrel)

Power Connector

2.1 mm x 5.5 mm Female

5VDC @ 2.0A OUTPUT

Green-Communication

LED

Yellow-Power

LED

5 VDC

ADAPTER

Rear View of PRIMUX-UZR

Cat5

Monitor

SUN

Devices

PS/2

Devices

Mouse

Kybd

RS232

USB

Devices

5VDC

NETW ORK

TECHNOLOGIES

INCORP ORA TED

Tel:330-562-7070

Fax:330-562-1999

1275 Danner Dr

Aurora, OH 44202

www .nti1.com

NTI

Rear View of PRIMUX-UZR User Station

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

Network-technologies CAT5 Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Network-technologies CAT5