Network Technologies ST-2U Manuel d'utilisateur télécharger pdf (Page 20)

NTI NODEMUX SERIES UNIVERSAL KVM SWITCH

17

TROUBLESHOOTING

If the ST-2U 2-Port Universal KVM switch is not working properly, consider the suggestions below to see if a solution can be

found.

• Verify that all cables are securely connected.

• Verify that the CPU is connected to a Keyboard port and Video port with the same CPU port number.

• If a CPU seems to be locked up, press the “CPU SELECT” button a couple of times.

• If the problem persists, unplug the keyboard and mouse cables (not the CPU keyboard and mouse) from the ST-2U and

reconnect them.

• Power-up the NTI switch first, then the CPUs.

Note: always follow the power-up sequence (See page 9).

• If a Compaq Proliant 2000 or non-Intel architecture Unix machine with PS/2 ports (such as HP9000) does not detect a

keyboard or mouse attached when booting, booster cables (VKTINT-1K-1) may be needed for both the keyboard and mouse

CPU ports. If booster cables are used, they must first be connected to both PS/2 keyboard and mouse connectors on the

VKTINT-1 adapter cable that is then connected to the CPU port on the switch.

If the suggestions above have been tried and the NTI ST-2U 2-Port Universal KVM switch is still not functioning properly, a

solution to the problem may be found on our website at http://www.nti1.com in our FAQ (Frequently Asked Questions) section, or,

please call us directly

at (800) 742-8324 (800-RGB-TECH) in the US & Canada or (330) 562-7070 (Worldwide) and we’ll be happy to

assist in any way we can.

ST-2U Options:

SERIAL NO.: -13W3

-U

DATE: -RS

-A

INSPECTED BY: -TS

-DV

Man 042 Rev. 4/15/04

Network Technologies ST-2U Manuel d'utilisateur Page 20